Configuration - PLCnext Store

Available from firmware 2021.0 LTS

Accessibility

This WBM page is accessible with user role:

  • Admin
  • SecurityAdmin (from firmware 2022.0 LTS)

How to get into the WBMHow to get into the WBM

Establishing a connection to the Web-based Management (WBM):

  • Open a web browser on your computer.
  • In the address field, enter the URL https://<IP-address-of-the-controller>/wbm,
    for example: https://192.168.1.10/wbm.

For further information, see WBM.

PLCnext Store page

The PLCnext Store page provides status information on the connection between the controller and the PLCnext Store.

You can also specify if you want to operate the controller with or without PLCnext Store connection.

Enabling the PLCnext Store connection

If you want to operate the controller with PLCnext Store connection, you have to enable the PLCnext Store service of the controller. When the PLCnext Store service of the controller is enabled, the controller tries to establish a connection to the PLCnext Store.

  • Enable the Enable PLCnext Store Service check box.
  • Click on the Apply button.

The PLCnext Store connection for the controller is enabled. Now you can specify which service you want to use.

Note: To protect the PLCnext Store configuration against unauthorized access, see Blocking the Proficloud access in the Security section.

Disabling the PLCnext Store connection

If you want to operate the controller without PLCnext Store connection, you have to disable the PLCnext Store service of the controller. In this case, it is not technically possible to establish a connection between the controller and PLCnext Store .

  • Disable the Enable PLCnext Store Service check box.
  • Click on the Apply button.

The Proficloud connection of the controller is disabled.

 

 


•  Web browser recommendation: Chrome/Edge 88 or newer, Firefox ESR 90 or neweror Safari • 
• Published/reviewed: 2022-09-14 • Revision 046 •