Configuration - Proficloud V3

Available with firmware 2020.6 on AXC F 2152 only (from 2021.0 LTS on all devices available as Configuration - Proficloud Services)


This WBM page is accessible with user role:

  • Admin

How to get into the WBMHow to get into the WBM

Establishing a connection to the Web-based Management (WBM):

  • Open a web browser on your computer.
  • In the address field, enter the URL https://<IP-address-of-the-controller>/wbm,
    for example:

For further information, see WBM.

Proficloud V3 page

The Proficloud V3 WBM page provides status information on the connection between a PLCnext Control  AXC F 2152 and Proficloud V3.

You can also specify if you want to operate the controller with or without Proficloud V3 connection.

For more information on the Proficloud V3, services and benefits see:


Enabling the Proficloud V3 connection

If you want to operate the controller with Proficloud V3  connection, you need to enable the Proficloud V3 service of the controller. When the Proficloud V3 service of the controller is enabled, the controller tries to establish a connection to the Proficloud V3.

  • Enable the Enable Proficloud V3 Service check box.
  • Click on the Apply button.

The Proficloud V3 connection for the controller is enabled.

Note: To protect the Proficloud V3  configuration against unauthorized access, see Blocking the Proficloud access in the WBM's Security section.

Disabling the Proficloud V3 connection

If you want to operate the controller without Proficloud V3 connection, you have to disable the Proficloud V3 service of the controller. In this case, it is not technically possible to establish a connection between the controller and Proficloud V3.

  • Disable the Enable Proficloud V3 Service check box.
  • Click on the Apply button.

The Proficloud connection of the controller is disabled.





•  Web browser recommendation: Chrome/Edge 88 or newer, Firefox ESR 90 or neweror Safari • 
• Published/reviewed: 2022-09-14 • Revision 046 •